Electrolux EKC60752 user manual Cooking/roasting with Automax

Cooking/roasting with Automax

This is how you activate the function. NOTE! This must be done each time you wish to use the automatic system.

1Set the function AUTOMAX, A appears in the display.

2Then make the desired setting for cooking/roasting. It takes about

5 seconds before A lights up in the indication area.

The heater zone display shows A. This implies that the heating zone operates at maximum heat for a certain time, depending on the heating setting selected. See the diagram.

When the time has expired, there is automatic switch-over to the set value and the letter A is no longer shown.

If the setting is changed during heating with AUTOMAX this function disappears and re-setting must be carried out.

In general it can be said that settings 2–5 are suitable for cooking and settings 6–8 for roasting. For heat retention, setting 1 is suitable. But, as usual, you must experiment to find the setting and heating zone that is best for you and your pots and pans.

Here is a little advice concerning the right heating setting and suitable heating zone. Each zone corresponds to a number in the tables (SEE ILLUSTRATION).

AUTOMAX approx. minutes

9

8

7

6

5

4

3

2

1

0 1 2 3 4 5 6 7 8 9

HEAT SETTING

Cooking

PORTIONS ZONE SETTING ONE

PORTION

porridge (oats, rye)	2	1,2,4	3
	4	3	3
Potatoes	2-4	1,2,4	3-4	3 pc

25