Electrolux EKC60752 user manual The blade scraper

Models: EKC60752

1 72
Download 72 pages 35.48 Kb
Page 53
Image 53
The blade scraper

The blade scraper

KEEP THE BLADE SCRAPER OUT OF

THE REACH OF CHILDREN. Use the blade scraper with care, the blade is extremely sharp.

Use the scraper to remove anything that has boiled over and stuck on the ceramic glass plate. Do not use the scraper or other sharp implements on the silicon edge since this implies a safety risk and can cause damage.

HOW TO USE THE BLADE SCRAPER:

1Pull back the guard so that the blade is visible (SEE ILLUSTRATION).

2Make sure that the blade is clean and whole, otherwise it could damage the plate. You can buy new blades at a hardware store.

3Hold the scraper at an angle of about 45° and scrape clean. You can press the blade hard against the plate without damaging it.

4Carefully wipe off any dirt from the blade with kitchen tissue.

5After use, press the guard forward so that it covers the blade. Store the scraper out of the reach of children.

REPLACING THE BLADE:

1Open the scraper by fully loosening the screw (no screwdriver needed) and fitting the new blade at the front edge.

2Assemble the scraper and tighten the screw again.

3Press the guard as far forward as it will go to protect the blade.

52

Page 53
Image 53
Electrolux EKC60752 user manual The blade scraper