Electrolux EKC60752 user manual Using grids, baking plates and roasting pan, Using the oven grid

Using grids, baking plates and roasting pan

It is important for the oven grid, the shelves and the roasting pan to be fixed between the stops in the front and rear edges of the rails to prevent them from falling off the rails.

Place the baking plate/roasting pan/grid in the rear edge and fix against the front edge. The locating pin fits into a slot under the edge of the baking plate/roasting pan, which means that the baking plate/roasting pan is held in position.The rails must be in their pushed-in position when the grid/baking plate/roasting pan is inserted. For the best shelf stability, make sure that the bevelled edge is inwards in the oven. Pull the accessories carefully when using them so that the plate/pan/grid does not fall off the rails. Maximum load 20kg (44 lb.).

Using the oven grid

The locating pin is not needed when using the grid. The oven grid shelf has a mark on its upper surface. This marking must be at the front (towards the oven door) when in use. Make sure that food placed on the grid is positioned behind the marking. Otherwise there is a risk that it will not be cooked properly at the front. The grid can be placed in the roasting pan. The maximum weight to be placed on the grid is 10kg (22 lb.).

NOTE! Make sure that the locating pin hooks in under the baking plate edge/roasting pan and that the baking plate/roasting pan rests on the rails, otherwise it can fall off the rails in the pulled-out position. When the baking plate/roasting pan is removed in the pulled-out position, the rails must be pushed back again so that the oven door can be closed. Use oven gloves because the rails are hot.

16