Electrolux OHV service manual Adjustments, For Husqvarna Parts Call 606-678-9623 or

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

SECTION 6: ADJUSTMENTS

6.01 Belt Guide

6.11Klik Pin Position for wheels on Power Steering Drive Snowthrower

6.12Klik Pin Positions for wheels on Standard Drive Snowthrower

6.21Adjustment for Drive System Control Rod

6.22Adjustment for worn Traction Disc Ring

6.23Adjustment for Auger Control Rod

6.24Adjustment for Speed Control Rod

6.31Procedure to add shim washer when Power Steering Slips

6.01 Belt Guide -

*Remove spark plug wire from plug.

*Engage auger lever and adjust clearance be- tween belt and belt guide to 1/16" to 1/8".

BELT GUIDE

1/16" to 1/8"

CLEARANCE

AUGER BELT

6.11Klik Pin Position for wheels on Power Steering Drive Snowthrower

6.12Klik Pin Positions for wheels on Stan- dard Drive Snowthrower

*To Push the snowthrower easily, the Klik Pin should be through the outer axle hole, with the wheel hub to the inside.

TRACTION BELT IDLER SPRING

*This is the only position for the Klik Pin where the Power Steering will work. The hole in the wheel hub is NEVER used with Power Steering.

*For the wheel to drive, the Klik Pin should be positioned through both the wheel hub and inner axle hole.

23

www.mymowerparts.com