For Husqvarna Parts Call
SECTION 7: Systems and Repair Procedures
7.10Handles and Console Panel – Exploded Parts View
7.11Remove Console Panel to service controls and handles
7.12Auger Engagement Interlock
7.13Replace Headlight –
7.14Control Panel, Discharge Chute, Controls – Exploded Parts View
7.16Replace Chute Control Cable
7.17Replace Chute Deflector Control
7.18Replace Speed Control Linkage or Speed Control Assembly
7.19Remove and Replace Power Steering Control Cable
7.21Power Steering and Wheel - Exploded Parts View
7.22Repair Power Steering Clutch
7.23If Power Steering Slips -
7.24Power Steering uses Klik Pin in one position only
7.25Standard Drive uses Klik Pin in Drive and Push positions
7.31Idlers, Belts, Pulleys
7.32Replace Auger Belt
7.33Belt Guide Dimensions
7.34Replace Traction Drive Belts
7.35Replace Traction Drive Pulley
7.36Idler Spring Locations
7.37Remove And Replace Engine
7.41Exploded view of Friction Disc, Friction Plate, and Gears
7.42Procedure to Remove Bottom Pan
7.43Replace Friction Disc or Friction Disc Shaft
7.44Replace Rubber Wheel Ring or Hex Shaft
7.45Replace Drive Plate Assembly Lubrication INSTRUCTION )
7.46Disassemble Drive Plate / Drive Pulley Assembly
7.47Remove and Replace Wheel Drive Axle / Gear
7.51 Remove Chute Assembly for servicing other items
7.61Remove Auger Assembly for servicing
7.62AUGER Exploded Parts View
7.63Replace Auger Shear Bolts
7.64Replace Impeller Shear Bolts
7.65Disassembly of Auger Pulley, Auger, Impeller, and Auger Housing
7.66Re assembly of Auger Assembly
7.67Replace Scraper Bar – reversible
7.68Gearbox Repair Information
27
www.mymowerparts.com
