Model 7003M

Operator Manual

June 2002

 

748223-K

 

 

 

SECTION 8

RETURN OF MATERIAL

8-1 RETURN OF MATERIAL

If factory repair of defective equipment is required, proceed as follows:

1.Secure a return authorization from a Rosemount Analytical Inc. Sales Office or Representative before returning the equipment. Equipment must be returned with complete identification in accordance with Rosemount instructions or it will not be accepted.

Rosemount CSC will provide the shipping address for your instrument.

In no event will Rosemount be responsible for equipment returned without proper authorization and identification.

2.Carefully pack the defective unit in a sturdy box with sufficient shock absorbing material to ensure no additional damage occurs during shipping.

3.In a cover letter, describe completely:

The symptoms that determined the equipment is faulty.

The environment in which the equipment was operating (housing, weather, vibration, dust, etc.).

Site from where the equipment was removed.

Whether warranty or non-warranty service is expected.

Complete shipping instructions for the return of the equipment.

4.Enclose a cover letter and purchase order and ship the defective equipment accord- ing to instructions provided in the Rose- mount Return Authorization, prepaid, to the address provided by Rosemount CSC.

Rosemount Analytical Inc.

Process Analytical Division

Customer Service Center

1-800-433-6076

If warranty service is expected, the defective unit will be carefully inspected and tested at the factory. If the failure was due to the conditions listed in the standard Rosemount warranty, the defective unit will be repaired or replaced at Rosemount’s option, and an operating unit will be returned to the customer in accordance with the shipping instructions furnished in the cover letter.

For equipment no longer under warranty, the equipment will be repaired at the factory and returned as directed by the purchase order and shipping instructions.

8-2 CUSTOMER SERVICE

For order administration, replacement Parts, application assistance, on-site or factory repair, service or maintenance contract information, contact:

Rosemount Analytical Inc.

Process Analytical Division

Customer Service Center

1-800-433-6076

8-3 TRAINING

A comprehensive Factory Training Program of operator and service classes is available. For a copy of the Current Operator and Service Training Schedule contact the Technical Services Department at:

Rosemount Analytical Inc.

Customer Service Center

1-800-433-6076

Rosemount Analytical Inc. A Division of Emerson Process Management

Return of Material

8-1