Manuals / Emerson / Computer Equipment / Computer Hardware

Emerson MVME147 manual Related Documentation, Motorola, Document Title, Publication Number

Models: MVME147

1 170

Download 170 pages 32.5 Kb

Page 8

Related Documentation

1	GENERAL INFORMATION

3.Common Command Set for floppy matches SCSI II rather than revision 17B.

4.Under Common Command Set the cache is not enabled on these devices.

5.Seagate /M means Motorola proprietary.

6.Firmware assembly order number is: 966096. Order number for tape drives is

(85xx) as shown with drive type. Order from: Tanberg Data A/S, Data Storage Division, P.O. Box 9, Korsvoll N-0808, Oslo 8, Norway, Phone +47 2 18 90 90 or Tanberg Data Tech. Center, 1077 Business Center Circle, Newbury Park, CA 91320, Phone +1 (805) 375-2500.

Related Documentation

The publications listed in the following table may provide additional helpful information. If not shipped with this product, they may be purchased from Motorola’s Literature Distribution Center, 616 West 24th Street, Tempe, AZ 85282; telephone (602) 994-6561. Non-Motorola documents may be obtained from the sources listed.

	MOTOROLA

DOCUMENT TITLE	PUBLICATION NUMBER


MVME147 MPU VMEmodule User’s Manual	MVME147

MVME147S MPU VMEmodule User’s	MVME147S
Manual

MVME147Bug Debugging Package User’s	MVME147BUG
Manual

MVME712A/MVME712AM/MVME712B	MVME712A
Transition

Module and MVME147P2 Adapter Board

User’s Manual

MVME712M Transition Module and	MVME712M
MVME147P2

Adapter Board User’s Manual

1-8

Image 8

Emerson MVME147 manual Related Documentation, Motorola, Document Title, Publication Number

Contents

Features GENERAL INFORMATIONIntroduction Modes of OperationMVME147 SCSI Firmware Entry Points The SCSI firmware initializes these vectors Equipment Supported CONTROLLE CONTROLLE CONTROLLEDEVICE PARTDevices Supported Under Common Command Set CONTROLLEDEVICE PARTRelated Documentation MOTOROLADOCUMENT TITLE PUBLICATION NUMBERManual Terminology MOTOROLAGENERAL INFORMATION Introduction CUSTOM SCSI PACKETSInitiator Role Custom Packet CUSTOM SCSI PACKETS Initiator Role Custom Packet NOTES PHASE CODE PHASEInitiator Role Custom Packet +$00 +$68 status Note ASYNC the firmware status xxxxxxxx xxxxxxxx Page CUSTOM SCSI PACKETS Initiator Role Custom Packet CUSTOM SCSI PACKETS TARGET Enable Custom Packet TARGET Enable Custom PacketNOTES Status from SCSITARGET Enable Custom Packet TARGET Sequence Custom Packet TARGET Sequence Custom Packet CUSTOM SCSI PACKETS NOTESTARGET Sequence Custom Packet WORDS $04 and $06 CUSTOM SCSI PACKETS TARGET Sequence Custom Packet CUSTOM SCSI PACKETS TARGET Sequence Custom Packet RETRY COUNT. Not used by the TARGET role firmwareCUSTOM SCSI PACKETS Control Flags PACKET RETURN STATUSPacket Return Status SCSI Bit 3 FM Filemark Bit 4 COMMAND RETRY 1 = Retries were performed Bit 5 COMMAND REThe command was retried retry count times Packet Return Status Bit 2 EOM End of mediaPACKET RETURN STATUS Table 3-1.Packet Status Codes Intermediate ReturnCodes CODEFinal Return Codes Table 3-1.Packet Status CodesCODE Intermediate ReturnTable 3-2.Packet Status Codes cont’d SCSI Bus Reset Packet section in ChapterCODE MEANINGRequest-Sense-Data Error-Class7 Codes Table 3-3.Packet Status Codes cont’dController-Dependent CODESCSI Status Returned in Status Phase Table 3-4.Packet Status Codes cont’dCODE MEANINGRequest-Sense-Data Error-Class0 through 6 Codes Table 3-5.Packet Status Codes cont’dCODE Controller-DependentPage PACKET RETURN STATUS SCSI FIRMWARE INTERRUPT STRUCTURE SCSI Firmware Interrupt StructureSCSI FIRMWARE INTERRUPT STRUCTURE WRITING A DRIVER SCSI_CMDSCSI_ACTV SCSI_INTPassing Commands to the SCSI Firmware Building the PacketInterface Rules for the SCSI Firmware Figure 5-1.SCSI Disk Driver Interface to VERSAdosInterface Rules for Multiple Callers WRITING A DRIVER Care must be taken not to modify the contents of WRITING A DRIVER Interface Rules for the SCSI Firmware FUNNEL WRITING A DRIVER Interface Rules for the SCSI Firmware WRITING A DRIVER MOVE.W 2A2,D0 THE CODE BELOW HANDLES FINAL RETURN CODES Interface Rules for a Single Caller WRITING A DRIVER Introduction TARGET ROLE ROUTINESMVME147 SCSI Firmware Background SCSI Versus SASI Rules Custom Sequence PacketCommand Table ScriptEnabling TARGET Role Enabling TARGET Role Servicing the TARGET Requests Servicing the TARGET Requests TARGET ROLE ROUTINES Servicing the TARGET Requests TARGET ROLE ROUTINES Servicing the TARGET Requests TARGET ROLE ROUTINES SCSI PACKETS Table 7-1.SCSI FunctionsIntroduction SCSIRead/Write Packet TableSCSI Functions cont’d SCSIDISK and TAPE Controller logical unit in SG table, if zero SCSI PACKETS Old Packet Supported for Compatibility+$12 in SG table, if zero DMA Scatter/Gather Table Entry Read/Write Packet|function code 3 bits 1 = link to next entryFor example $5 isCOMMAND Attach/Detach Packet all devicesCOMMAND CONTROLLERCOMMAND Attach/Detach Packet all devicesSCSI PACKETS +$1E FM encoding, single Controller type refer xxxxxxxx attributes byte offset +$20 Single track density Drive type 0 = Attach/Detach Packet all devices Example for floppy3½, 5¼ 3½, 5¼,3½, 5¼ 3½, 5¼,3½, 5¼ 3½, 5¼+$04 Minimum read QIC-24 if this is set to 0, the +$00 Reserved Interrupt level +$00 +$9E $00 Format Packet Assign Alternate Sector Packet SCSI COMMAND+$0E Assign Alternate Sector Packet SCSI SCSI PACKETS DEFECT LIST TYPE0 Note 3, NOTES Head Bytes from Index MSW NoteSCSI Bus Reset Packet Controller logical unit SCSI Controller Reset Packet Erase Packet+$12 Rewind Packet Device logical unit Read Block Limits Packet SCSI PACKETS where n = number of blocks or filemarks to Space Status from SCSI The table below shows the write filemarks packet Write Filemarks PacketWrite Filemarks Packet Controller logical unit The controller must be in general or read mode Verify CRC PacketTape Mode Select/Sense Packet Tape Mode Select/Sense Packet Number of tracks on Inquiry Packet +$00 Reserved +$1A Load/Unload Packet +$14 Recover Buffer Data Packet +$0C Request Sense Data Packet Controller logical unit Check Status Packet Open Packet SCSI PACKETSOpen Packet SCSI PACKETS BYTE COMMON COMMAND SET AND DISK OPERATIONBYTE OFFSET BYTE OFFSET BYTEBYTE OFFSET ENTRY NUMBER BYTE OFFSETCOMMON COMMAND SET AND DISK OPERATION NOTESSend mode select command COMMON COMMAND SET AND DISK OPERATION DEFECT LIST DEFECT LIST TYPEBYTE OFFSET NOTESBYTE OFFSET Mode Select HeaderBYTE OFFSET Block Descriptor BYTE OFFSETBYTE OFFSET COMMON COMMAND SET AND DISK OPERATIONNOTES Mode Select Header BYTE OFFSETBlock Descriptor BYTE OFFSETBYTE OFFSET BYTE OFFSETNOTES VALUEMode Select Command CDB BYTE OFFSETVALUE COMMENTSCOMMON COMMAND SET AND DISK OPERATION Mode Select HeaderBYTE OFFSET Block DescriptorPage code BYTE OFFSETBYTE OFFSET BYTE OFFSET COMMON COMMAND SET AND DISK OPERATIONNOTES ATTRIBUTE FLAGS MEDIATYPE Mode Select HeaderCOMMON COMMAND SET AND DISK OPERATION ATTRIBUTE FLAGSMEDIA TYPEBYTE OFFSET BYTE OFFSETNOTES VALUEPIN 34 CONTROL COMMON COMMAND SET AND DISK OPERATIONPin 2 and Pin 34 Definition for High Density Pin 2 and Pin 34 Definition for Low DensityPIN 34 CONTROL PIN 2 CONTROLCOMMENTS Pin 34 = driveA-22