Emerson MVME147 manual Write Filemarks Packet, The table below shows the write filemarks packet

		Write Filemarks Packet
$19	xxxxxxxx	Status from SCSI
		firmware (byte 3)
		(Note 1)

7

NOTE: 1. Refer to Chapter 3.

Write Filemarks Packet

The write filemarks command ($10) writes the specified number of filemarks to the tape.

Note

The controller must be in general mode or write mode. Refer to tape read/write packet for more information.

The table below shows the write filemarks packet.

Even Byte \

Odd Byte \

	FC		B8		74			30
+$00		Controller LUN					Device LUN
+$02		Status Byte 0				Status Byte 1 (Note 1)
+$04				Number of Filemarks
+$06		0		0		0		0
+$08		0		0		0		0
+$0A		0		0		0		0
+$0C		0		0		0		0
+$0E		0		0		0		0
+$10		0		0		0		0
+$12		0		0		0		0
+$14		0		0		Function Code (3C)
+$16		Interrupt Level					Vector Number
+$18		Status Byte 2				Status Byte 3 (Note 1)

7-49