7 |
SCSI PACKETS
$02 | xxxxxxxx |
| Status from SCSI |
|
|
| firmware (byte 0) |
|
|
| (Note 1) |
$03 | xxxxxxxx |
| Status from SCSI |
|
|
| firmware (byte 1) |
|
|
| (Note 1) |
$04 | xxxxxxxx | xxxxxxxx | Number of blocks |
$06 | 00000000 | 00000000 | Reserved |
$08 | 00000000 | 00000000 | Reserved |
$0A | 00000000 | 00000000 | Reserved |
$0C | 00000000 | 00000000 | Reserved |
$0E | 00000000 | 00000000 | Reserved |
$10 | 00000000 | 00000000 | Reserved |
$12 | 00000000 | 00000000 | Reserved |
$14 | 00000000 |
| Reserved |
$15 | 01000000 |
| SCSI function ($40 = |
|
|
| verify CRC) |
$16 | 00000xxx |
| Interrupt level (7 |
|
|
| through 0) (0 = polled |
|
|
| mode) |
$17 | xxxxxxxx |
| Vector number to use |
|
|
| upon return |
$18 | xxxxxxxx |
| Status from SCSI |
|
|
| firmware (byte 2) |
|
|
| (Note 1) |
$19 | xxxxxxxx |
| Status from SCSI |
|
|
| firmware (byte 3) |
|
|
| (Note 1) |
NOTE: |
| 1. | Refer to Chapter 3. |
Tape Mode Select/Sense Packet
The tape mode select command ($15) configures the controller for the specified operational parameters.
The tape mode sense command ($1A) returns the QIC format, controller and drive type, block size, and buffered mode.
