Two-Wire Serial Interface

2

Table 2-3. M48T37V Access

Address Offset

Function - 0xF1110000

 

 

 

0x0000

- 0x5FFF

Available for users

 

 

 

0x0100

- 0x0200

VxWorks "bootline"

 

 

 

0x6000

- 0x6FFF

Reserved (MOTLoad expansion)

 

 

 

0x7000

- 0x7FEF

MOTLoad use (GEVs)

 

 

0x7FF0 0 0x7FFF

Real Time Block

 

 

 

Two-Wire Serial Interface

Atwo-wire serial interface for the MVME6100 is provided by an I2C

compatible serial controller integrated into the MV64360 system controller. The I2C serial controller provides two basic functions. The first function is to provide MV64360 register initialization following a reset. The MV64360 can be configured (by switch setting) to automatically read data out of a serial EEPROM following a reset and initialize any number of internal registers. In the second function, the controller is used by the system software to read the contents of the VPD and SPD EEPROMs contained on the MVME6100 to initialize the memory controller and other interfaces. For additional details regarding the MV64360 two-wire serial controller operation, refer to the MV64360 System Controller Data Sheet. See Appendix A, Related Documentation.

http://www.motorola.com/computer/literature

2-9

Page 42
Image 42
Emerson MVME6100 manual Two-Wire Serial Interface, M48T37V Access