Board Description and Memory Maps

1

Introduction

This chapter briefly describes the board level hardware features of the MVME6100 single-board computer, including a table of features and a block diagram. The remainder of the chapter provides memory map information including a default memory map, MOTLoad’s processor memory map, a default PCI memory map, MOTLoad’s PCI memory map, a PCI I/O memory map, and system I/O memory maps.

Note Programmable registers in the MV64360 system controller are documented in a separate publication and obtainable from Motorola Computer Group by contacting your Field Area Engineer. Refer to Appendix A, Related Documentation, for more information on obtaining this documentation.

Overview

The MVME6100 is a single-board computer based on the PowerPC MPC7457 processor, the Marvell MV64360 system controller, up to 2 GB of ECC-protected DDR DRAM, up to 128MB of Flash memory, a dual Gigabit Ethernet interface, two asynchronous serial ports, and two IEEE1386.1 PCI, PCI-X capable mezzanine card slots (PMCs).

1-1

Page 14
Image 14
Emerson MVME6100 manual Introduction, Overview