Basic Operations
Notes:
1.You need to continuously press BROADCAST key when doing broadcast. The broadcast will be over once user release the key.
2.You need to notice that there is no
3.You can press the SILENT (Left softkey) if you choose to ignore the call. The SILENT key operation is valid only for the current call. You can silent all broadcast by turning off the ringer to set
Redial (For DuraFon PRO only)
1.Press REDIAL (Left softkey).
2.The LCD shows the last phone number dialed. To dial this number, press DIAL (Left softkey).
3.Use Up or Down Arrow Key to scroll through the last 10 phone numbers dialed. Select and press DIAL key.
Note:
Intercom numbers (Handset ID) are not stored in the last 10 numbers dialed log.
Receiving a Telephone Call (For DuraFon PRO only)
1.When an incoming call arrives, the handset will ring or vibrate unless the ringer has been turned off.
2.If the handset is on the charger cradle (ringer will be temporarily switched to “Ring” if it has been set to “Vibrate” ), lift the handset and start the conversation.
3.If the handset is not on the cradle, press any key (except END , and the SILENT softkey) to answer.
4.During the call, press and hold the TALK Key, the speakerphone is active. Re:DuraWalkie handset can’t receive a telephone call directly, but it can
receive a transferred telephone call from PRO handset.
36
