EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge user manual Product Features

5.1	SYSTEM INFORMATION		38
5.2	STATISTIC INFORMATION		39
5.3	SITE SURVEY		40
5.4	WIRELESS LINK INFORMATION		41
CHAPTER 6.		SPECIFICATIONS	42
6.1	HARDWARE SPECIFICATIONS		42
6.2	SOFTWARE SPECIFICATIONS		44
CHAPTER 7.		DEFAULT SETTINGS	45
7.1	GENERAL CONFIGURATION		45
7.1.1		System	45
7.1.2		SNMP	45
7.1.3		Wireless LAN	46
7.2	UTILITY		48
7.2.1		Software Upgrade	48
7.2.2		Administration	48
CHAPTER 8. REGULATORY COMPLIANCE INFORMATION			49

Version 1.02 ii

Chapter 1. Introduction

1.1Introducing the Wireless client bridge

The Wireless client bridge is a fully interoperable with IEEE 802.11b compliant Outdoor Wireless Last-mile product. The Wireless client bridge operates in remote bridge mode, and connects Outdoor Wireless Router Bridge to construct point-to-point as well as point-to-multipoint topologies, for maximum flexibility in configuring building-to-building networks to WISP.

1.2Product Features

9Outdoor enclosure in compliance with IP67

9RF transmit power 100mW (20dBm) with -85dBm Rx sensitivity @ 11Mbps data rate

9Embedded 9dBi patch directional antenna

9Support 24VDC 0.8A Power-over-Ethernet

9NAT/NAPT and Virtual Server Mapping support

9MIB-II and Private MIB support

9MAC address based access control

1.3Package Contents

The product package contains the following items.

1.One (1) Wireless client bridge Outdoor Wireless Client Bridge unit

2.One (1) 100~240VAC, 50~60Hz AC/DC adapter with wall- mount plug and DC plug power cord

3.One (1) 24VDC, 830mA Inline Power Injector (PoE)

4.Three (3) water protect kit consists of 3 of components

5.One (1) 1.8m grounding wire

6.One (1) User manual CD-disc

7.One (1) wall/mast mounting kit, including one (1) band clamp

Version 1.02 1