shown below.
Step 2 Press <Esc> keystroke to reboot the Wireless client bridge. Press <x> key during the boot process, and it will display prompt character NetARM> as the figure shown in the next page.
Step 3 Press “h” keystroke, it will display related commands as the figure shown below.
Step 4 Select “F
Step 5 Select “3: SOHO” and select “4: WEBIMG” to update the firmware files one by one.
Step 6 While the window starts to display “C” character continuously, click Transfer and select the new firmware files <soho.bin> file, press “OK” to start to transfer file to Wireless client bridge.
Step 7 Select “4” to upgrade WEBIMG file. The procedures are the same with upgrading SOHO file (go back to step 5), but should select <pfs.img> file correctly for WEBIMG file upgrade.
Step 8 After the upgrade completes, remember to press “R” keystroke to reboot the system.
Note: The default transfer protocol is using “Xmodem”, so please make sure you select correct protocol to download/upload files when you try to upgrade the Wireless client bridge’s firmware files.
Version 1.02 | 18 | Version 1.02 | 19 |
