4.4.2 Administration
Step 1 Click Utility, Administration. The following figure shows the Utility – Administration page.
9Supervisor Account. Change the supervisor’s user name & password in the Supervisor Account field, and Click
FINISH to take effect on the previous configuration changes.
9Apply the New Settings. Click Utility, Administration, select the Save then Restart to apply the new configuration settings.
Step 2 Click FINISH to take effect on the previous configuration changes.
Hint: It takes about 10 seconds, to complete the restart process.
Chapter 5. Monitor Information
User can find the system running status and other information on this window. Click the Running Status link on the left window, use can choose which function that he wants to monitor.
General System Information
The following information can be found in this block.
9Product Model
9Host Name
9Software Version
9Build (Built by)
9Boot Code Version
9Web Version
9System Uptime
General System Status
The following information can be found in this block.
9Operation Mode
9Bridge IP Address
9Bridge Subnet
9Wireless SSID
Services Information
This block shows whether the following services are enabled or disabled.
9NAPT
9SNMP
9MAC Filter
9WEP encryption.
Version 1.02 | 36 | Version 1.02 | 37 |
