EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Preparing Installation

Figure 2.2.1

You can also mount the Wireless client bridge to the mast as shown in Figure 2.2.2.

Figure 2.2.2

2.3Preparing Installation

Before installing Wireless client bridge for the outdoor application in a hard- to-reach location, we recommend to configure and test all the devices first.

For configuring the Wireless client bridge, please follow the quick steps below to power up the Wireless client bridge.

Step 1:

Console Port

Connection

Step 4

Step 5

Step 2

Step 3

Step 1 Attach the 1.8m RS-232 null modem console cable to the Console Port on the Wireless client bridge unit (refer to page 4), and the other end (DB9 female type) to a terminal or a PC running a terminal emulation program.

Step 2 Plug the DC plug of the AC/DC power adapter into the DC Input Port of Inline Power Injector and the wall-mount plug into a power outlet or power strip (refer to page 4). The Power LED on the Inline Power Injector will light up.

Step 3 Run the cross-over type uplink Ethernet cable from Data Input Port (refer topage 4) to the Ethernet port on a PC

Version 1.02 6 Version 1.02 7