Manuals / EnGenius Technologies / Computer Equipment / Network Router

EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge Utility, Software Upgrade

Models: IEEE 802.11b Outdoor Wireless Client Bridge

1 27

Download 27 pages 26.16 Kb

Page 19

numbers 0 through 9 and the letters A through F. The 40-bit WEP keys can contain any combination of 10 of these characters; the 128-bit WEP keys can contain any combination of 26 of these characters. The letters are not case-sensitive.

4.4Utility

4.4.1 Software Upgrade

Step 1 Click Utility, select Software Upgrade page as the figure shown below, and then use TFTP to upgrade AP. In the Utility – Software Upgrade page, user must specify the TFTP server IP and select by which file to upgrade (Program image, Web image), then click OK button to start the TFTP upgrade process.

Step 2 If the upgrade process is success, the AP will apply the new settings and start rebooting right away.

Hint: You must set up a TFTP server and this server must contain one latest new image.

Version 1.02

34

Version 1.02

35

Image 19

EnGenius Technologies IEEE 802.11b Outdoor Wireless Client Bridge user manual Utility, Software Upgrade

Contents

Ieee 802.11b Outdoor Wireless Client Bridge Product Features Introduction Introducing the Wireless client bridgePackage Contents Before You Start Inline Power Injector PoEInstallation and Basic Configuration System RequirementsBefore After „ Interface on the Inline Power Injector „ Interface on the Wireless client bridge UnitPreparing Installation What you need to know Basic ConfigurationBasic Configuration Steps Move to page /Utility/Administration/, select„ Identify the IP Address assigned to the unit Login into the Web Interface„ Web Configuration „ Web Access Procedures„ Web Configuration Structure Set IP Address, Subnet Mask, Default Route IP„ Host Information Change Supervisor Account & Password Set Wireless Encryption for Wireless Interface„ Upgrade the Firmware using RS-232 console Upgrade the Firmware„ Setup your Tftp Server „ Update the Firmware using the Tftp methodVersion „ Downloading Configuration Files Back-up the Wireless client bridge’s Configuration Files„ Uploading Configuration Files Network Topologies Wireless Client Bridge-to-Central Wireless BridgeRemarks Version Wireless Client Router-to-Central Wireless Router „ Wireless Client Bridge Network Parameters IP ConfigurationConfigure Snmp Configure Community PoolConfigure Trap Host Pool Configure Wireless related parameters Utility Software Upgrade„ General System Information Administration„ Services Information Monitor InformationStatistic Information System InformationStatistic of Interface Site Survey Wireless Link Information Specifications Hardware Specifications Snmp Table of Snmp Community Pool Software SpecificationsDefault Settings General Configuration SystemTable of Snmp Trap Community Host Pool Wireless LAN„ Interference Statement Regulatory Compliance Information„ Radio Frequency Interference Requirements „ Radiation Exposure Statement„ European Community CE Notice Marking by the symbol： „ Professional Installation