Enterasys Networks RBTSA-AB, RBTSA-AA manual Deciding Where to Place the Ethernet Adapter

Deciding Where to Place the Ethernet Adapter 13

(Canadian Standards Organisation), IEC (International Electrotechnical Commission) oder von anderen, nationalen oder internationalen Sicherheitsvorschriften für das entsprechende Land zugelassen wurde. Alle Verweise auf Netzteile in diesem Dokument beziehen sich auf Netzgeräte, die diesen Anforderungen entsprechen.

CAUTION: The Enterasys Networks power supply (part number

61-0107-000) input relies on a 16A rated building fuse or circuit protector for short circuit protection of the line to neutral conductors.

VORSICHT: Der Eingang des Enterasys Networks-Netzteils (Teilenummer 61-0107-000) benötigt zum Schutz vor Kurzschlüssen in den Nullleitern eine 16-A-Sicherung oder eine Überstromsicherung.

Deciding Where to Place the Ethernet Adapter in a dry, clean location near the hub,

Place the Ethernet computer, or printer that will be connected to the Ethernet Adapter. The

Adapterlocation must have a power source and be within the following distance of a Wi-Fi compliant wireless LAN access point or ad-hoc wireless station:

■For 802.11a compatibility, place the Ethernet Adapter within 50 m (164 ft) of a Wi-Fi compliant wireless LAN access point.

■For 802.11b/g compatibility, place the Ethernet Adapter within 100 m (328 ft) of a Wi-Fi compliant wireless LAN access point.

The location should be away from transformers, heavy-duty motors, fluorescent lights, microwave ovens, refrigerators, or other equipment that could cause radio signal interference.

Wall-Mounting the The Ethernet Adapter comes with two plastic anchors and two flat head Ethernet Adapter mounting screws for mounting on a wall.