Enterasys Networks RBTSA-AA, RBTSA-AB manual Setting Description

32CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER

Table 9	System Properties Page (continued)
Property	Description	Default Value
Web GUI	This setting allows users to enable the	HTTP
Protocol	secure data exchange scheme over SSL
	during a configuration session.
	■ HTTPS — enables SSL technology.
	■ HTTP — disables SSL technology.

Setting IP Network Under System Configuration, click IP Network. The IP Network Properties Properties page appears, where you can change the settings shown in Table 10.

If you change the IP address and click Apply, you cannot continue to configure the device using the old IP address. Therefore, you must do the following steps after changing the IP address:

1Close your browser.

2Return to the Enterasys Networks Wireless Infrastructure Device Manager and click Refresh.

3Select the device and click Configure to start a new configuration session.

Table 10 describes the IP Network properties.

Table 10 IP Network Properties Page

Setting	Description
IP Network Setting	This setting allows you to change the IP address of the device.
	To let the device get an IP address automatically from a DHCP
	server, select Obtain an IP address automatically and click
	Apply.
	To specify an IP address, select Specify an IP address, enter the
	IP address parameters in the spaces provided, and click Apply.
IP Address	When Specify an IP address is selected, enter the IP address in
	the space provided, and click Apply.
Subnet Mask	When Specify an IP address is selected, enter the Subnet Mask
	in the space provided, and click Apply.
Gateway IP	When Specify an IP address is selected, enter the Gateway IP
Address	Address in the space provided, and click Apply.