50CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER
Viewing System Under System Summary, you can view the following information:
Summary
Table 14 System Summary Page
Property | Description | Default Value |
|
|
|
Device Name | The name assigned to the Ethernet Adapter. | RoamAbout |
| You can change the default name to one of | Ethernet |
| your choice by clicking System Properties | Adapter - |
| under System Configuration. | RBTSA |
Device Location | If you use the default device name, entering | None |
| the location is optional. |
|
Country Code | The Country Code determines the available | Varies |
| channels and transmission power level |
|
| based on regulatory restrictions in the |
|
| county where the Ethernet Adapter is |
|
| installed. |
|
Transmit Power | The level of transmission power (100%, | 100% |
| 50%, 25%, 12%, or Min). |
|
| You can change this setting by clicking |
|
| Wireless Network under System Configuration. |
|
MAC Address | The MAC address of the Ethernet Adapter. | N/A |
Serial Number | The serial number of the Ethernet Adapter. | Varies |
Firmware Version | The version of firmware the Ethernet | N/A |
| Adapter is currently using. |
|
DHCP Client | Determines if the Ethernet Adapter obtains | On |
| its IP address from the DHCP server on the |
|
| network. |
|
IP Address | The IP address of the Ethernet Adapter. You | Varies |
| can change this address by clicking IP |
|
| Network under System Configuration. |
|
Subnet Mask | The subnet mask address of the Ethernet | Varies |
| Adapter. You can change this address by |
|
| clicking IP Network under System |
|
| Configuration. |
|
Data Preamble | The data preamble setting (Short [Enhanced | Long |
| performance] or Long |
|
| To change this setting, click Wireless |
|
| Network under System Configuration. |
|
System Up Time | The elapsed time since the Ethernet Adapter | Day 0, 0:00:00 |
| booted up. |
|
Date Manufactured | The date the Ethernet Adapter was | N/A |
| manufactured. |
|
|
|
|
