Enterasys Networks RBTSA-AB, RBTSA-AA Using, Management, System, Subnet as the Ethernet Adapter

Using the Configuration Management System 29

Using the	The Enterasys Networks11a/b/g Wireless Ethernet Adapter Configuration
Configuration	Management System resides on the Ethernet Adapter and lets you
Management	configure the Ethernet Adapter through your Web browser.
System	To use the Configuration Management System, the computer you are
	using to connect to the Ethernet Adapter must be located on the same
	subnet as the Ethernet Adapter.

There are two ways to access the Configuration Management System:

■Enter the IP address of the Ethernet Adapter in your computer’s web browser.

■Start the Enterasys Networks Wireless Infrastructure Device Manager, locate the Ethernet Adapter, and then click Configure.

For non-U.S. versions of the Ethernet Adapter, when you first open the Configuration Management System you are prompted to select the country in which the Ethernet Adapter is operating. Select the country in which the Ethernet Adapter is installed to ensure compliance with local regulations, and then click Apply.

When you first open the Configuration Management System, you are prompted for a user name and password:

■User name — admin

■Password — blank (press enter)

The Configuration Management System displays the Connection Status page, as detailed in Table 8.

Table 8 Connection Status Page

Property	Description	Default Value
Connection	The MAC address of the associated	N/A
	access point.
Network Type	The type of network for which the	Wireless Client
	Ethernet Adapter is configured:	(Infrastructure)
	Wireless Client (Infrastructure) or
	Ad-hoc (Peer-to-Peer).
SSID	The Service Set ID.	Varies
Radio Mode	The way in which the Ethernet	Auto-Select
	Adapter selects a radio band.