30CHAPTER 3: CONFIGURING THE ETHERNET ADAPTER
Table 8 Connection Status Page (continued)
Current Channel | The channel over which the | Varies |
| Ethernet Adapter is |
|
| communicating with clients. |
|
Security | The type of security for which the | Open System |
| Ethernet Adapter is configured. | (no security) |
Rx Data Rate (Mbps) | The most recent data reception | N/A |
| rate. |
|
Tx Data Rate (Mbps) | The most recent data transmission | N/A |
| rate. |
|
Link Quality | The normalized transmitted data | N/A |
| rate (that is, the current data rate |
|
| over the maximum data rate). |
|
| Note: Link Quality is shown in |
|
| Infrastructure mode only. |
|
Received Signal | The strength of the radio signal | N/A |
Strength | that the Ethernet Adapter detects. |
|
| Note: Received Signal Strength is |
|
| shown in Infrastructure mode only. |
|
Activity (Packets Rx) | The number of packets the | N/A |
| Ethernet Adapter has received. |
|
Activity (Packets Tx) | The number of packets the | N/A |
| Ethernet Adapter has transmitted. |
|
IP Address | The IP address of the Ethernet | Varies |
| Adapter. |
|
|
|
|
Clearing and
Applying System
Configuration
Settings
The pages in the Configuration Management System have two buttons: Clear and Apply.
■Clear returns the settings to the values they were when you last clicked Apply.
■Apply stores the settings permanently in the nonvolatile flash memory. After you click Apply, the new settings take effect and you can see the changes on the System Summary page.
CAUTION: Your changes are lost if you forget to click Apply before moving to a new configuration page.
VORSICHT: Wenn Sie nicht auf "Apply" (Übernehmen) klicken, bevor Sie zu einer neuen Konfigurationsseite wechseln, gehen Ihre Änderungen verloren.
