22CHAPTER 2: INSTALLING THE ETHERNET ADAPTER
Ethernet Adapter Default Settings
Table 4 shows the Ethernet Adapter configuration factory defaults.
Table 4 Factory Default Settings
Property | Default Setting |
|
|
Device Name | RoamAbout Ethernet Adapter - RBTSA |
Device Location | None (blank) |
Country | For U.S. version, United States and Canada |
| For |
Client Mode | Support multiple wired Ethernet clients |
IP Network Setting | Obtain IP address automatically |
IP Address | Obtained automatically (with a DHCP server) |
| 169.254.2.2 (without a DHCP server) |
Subnet Mask | Obtained automatically (with a DHCP server) |
| 255.255.0.0 (without a DHCP server) |
Gateway IP Address | Obtained automatically (with a DHCP server) |
| 0.0.0.0 (without a DHCP server) |
Network Mode | Wireless Client (Infrastructure) |
Radio Mode | Auto Select |
Wireless LAN Service Area | Attach to any WLAN Service Area (ESSID) automatically |
Channel Selection | Automatic Best Channel (uses access point setting) |
Transmit Power | 100% |
Antenna Selection | Internal |
Data Preamble | Long (if Network Mode is set to |
| Same as access point setting (if Network Mode is set |
| to Wireless Client [Infrastructure]) |
Security Setting | Open System (no security) |
802.1x Authentication State | Disabled |
SNMP | Enabled |
Access Control List | Disabled |
Administration Login Name | admin |
Administration Password | None (blank) |
TFTP Server IP Address | None |
FTP Server IP Address | None |
|
|
