Maintaining and Transporting the Printer
5.If you’re removing the printer from its stand, first make sure the casters on the leg assembly are locked and the two stabilizer knobs are touching the floor.
caster lock
stabilizer knob
Warning
The printer is very heavy. Always have four people lift it, using the hand grip areas as shown.
6.Remove the two wing nuts securing the printer to the stand (underneath the printer). Keep them in a safe place.
7.With four people, lift the printer using the hand grips located at the four corners of the printer. (See the stickers located near the rear hand grips for the correct holding position.)
8. Keep the printer level while moving it.