1-32Setting Up the Printer

Setting Up Your FireWire Port

If you’re connecting with FireWire (IEEE-1394) on a Windows system, you may see a Found New Hardware Wizard for an EPSON 1394 Printer. If so, follow the steps below to install the driver software for the port. When done, resume installing the printer software where you left off.

1.At the first Found New Hardware screen, click Next.

2.At the screen below, click Search for a suitable driver, then click

Next.

3.Select Specify a location and click Next.

4.Click the Browse button and locate the correct Win2K_XP folder on the EPSON CD-ROM:

Note

You may see an additional Found New Hardware screen for IEEE-1394. If so, be sure to browse to the correct folder for your ink type and operating system.

•If your printer uses Archival ink, browse to the Drivers\Cf\Win2K_XP folder

•If you’re printer uses Photographic Dye, browse to the Drivers\Dye\Win2K_XP folder

•If you’re printer uses UltraChrome ink, browse to the Drivers\Uc\Win2K_XP folder

5.Click OK, then click Next to install the driver.

6.When done, click Finish. Then return to the printer software installation instructions where you left off.