Note

It’s a good idea to keep a list of your registered paper types and numbers.

Using Paper and Other Media 2-29

4.Use the + or - button to make any necessary changes, then press Enter to save your new setting.

5.To adjust another setting, continue pressing the Item button until you see the desired menu option.

6.When done, press the Pause or SelecType button to exit the menu.

Saving Your Settings

You can create up to 10 groups of settings, one for each type of paper you want to use. When doing so, you can also profile your paper’s thickness. Then you can easily select your customized settings whenever you print on a particular stock.

1.Press the SelecType button until PAPER CONFIG. MENU appears on the display.

2.Press the Item button. PAPER NUMBER=STD appears on the display.

3.If you’re registering your first roll or type of paper, press the + button to select PAPER NUMBER=1. Then press the Enter button.

For subsequent rolls, continue pressing the + button to select the number you want to register.

4.Press the Item button. THICK. PAT.=PRINT appears on the display. Press Enter to print the paper thickness test pattern.

Following is a sample pattern:

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

5.Examine the printed pattern to determine which set of lines is the straightest or has the most even edges, and note the corresponding number.

In the sample pattern, the lines under number 4 are the straightest.