Setting Up the Printer 1-7

6.Remove any packing tape from the printer. Be sure to check underneath and on the sides.

7.Open the front cover and remove the wing screw and washer from the print head. Save these parts in case you need to ship the printer.

Note

When choosing a place for the printer, leave adequate room for easy access and ventilation. Avoid locations subject to direct sunlight, excessive heat, moisture, or dust. Also avoid locations near potential sources of interference, such as loud speakers, cordless phones, TVs, or air conditioners.

8.Close the front cover.

9.Raise the stabilizer knobs and unlock the casters. Then move the printer to its place of use. (The casters are meant for moving the printer only over a short distance.) Lock the casters and extend the stabilizer knobs after moving.