2-22Using Paper and Other Media

7.Push the paper set lever all the way in, then close the lower cover. PRESS PAUSE BUTTON appears on the control panel display.

Caution

To avoid damaging the printer, never move the paper set lever while the Operate or Pause light is flashing.

Note

If print quality is not satisfactory, you may need to adjust the platen gap. See page 2-25.

8.Press the Pause button. The print head moves and the board feeds into printing position automatically. READY appears on the control panel. (Even if you don’t press Pause, the board and printer will move into printing position automatically after 10 seconds.)

9.Run your print job. After it is finished, the posterboard stays in the printer.

10.To remove the print, hold it while pulling the paper set lever out to the released position.