When turning the printer on, after the message 405x plus, the display indicates the printer status (Ready, Wait, Busy, Quiet), the current macro (M1, M2, M3, M4) and the selected emulation (IBM XL III or EPSON FX for the 4051/4051N plus printers and IBM XL 24E, IBM XL24 AGM and EPSON LQ for the 4056/4056N plus printers) as follows:
|
| Ready |
| |
|
|
| ||
The following list shows you the status and error messages in alphabetical order: | ||||
|
|
| ||
1.Enable path SS | Displayed when Bin | 1, Bin 2 (4051/4056 plus models only) or | ||
2.Remove paper | Manual paper path loading is not successful. Check the position of the | |||
| selection lever (towards the back of the printer for single sheets). | |||
|
| |||
Displayed when the fanfold paper to park is too long. Tear the printed | ||||
2.Remove paper | paper and press the PARK key again. | |||
|
| |||
2. Park paper | Displayed when Park operation is not successful. | |||
|
| |||
4051 plus or | This message appears on the display immediately after turning the | |||
4051N plus or | printer on to indicate that it is initializing to its power on setting. The | |||
4056 plus or | print head moves to its initial position. The printer is logically | |||
4056N plus | disconnected from the host and is disabled to receive data. The READY | |||
| indicator is turned off. |
|
| |
Bin 1
Bin 1/2
Bin 2
Displayed when ASF Bin 1 paper path is selected (4051/4056 plus models only).
Displayed when ASF Bin 1/2 paper paths are selected (4051/4056 plus models only).
Displayed when ASF Bin 2 paper path is selected (4051/4056 plus models only).
22