PROGRAM Normal Function | Keeping pressed this key while you turn on the printer you will |
| enter Power on Configuration Setup. Pressing this key when the |
| printer is unable to print, (indicator READY unlit) you will enter the |
| Program Setup and the Program Function of keys are enabled. |
| The PROGRAM indicator is turned on when the function is enabled. |
| Pressing this key when the PROGRAM indicator is turned on, the |
| Program Function is disabled and the indicator turned off. |
|
|
Program | If you press this key while you are in the Program Setup you will |
Function | exit the configuration mode saving the function values that have |
| been changed. |
| If changes occurred, the message SAVE MACRO? will be displayed. |
| Now, if you press the PROGRAM key you will exit the function and |
| the new values will be only used as current ones. (When you turn |
| off the printer you will loose any change you have made).If you |
| press the → key, you will exit the Program Function and the |
| modified values of the selected macro will be stored in a permanent |
| mode. |
|
|
| SHIFT | Normal Function | Press the SHIFT key to select the Shift Function of the keys. The |
|
|
| SHIFT indicator lights and the message Shift will be displayed as |
|
|
| long as a key available for this function is pressed. |
|
|
|
|
|
| Shift Function | Pressing the SHIFT when the SHIFT indicator is lit and the message |
|
|
| Shift is displayed, disables the Shift function. The SHIFT indicator |
|
|
| is unlit. |
|
|
|
|
34