Switching From Fanfold Paper to Cut Sheet
If you have been using fanfold paper and you have not removed it, your printer allows the cut sheet loading after performing a parking of the inserted fanfold paper (PARK function).
1.Make sure that your printer is turned on and disabled to print (READY indicator unlit). Tear the fanfold paper that is currently loaded along the last perforation.
4051/4056 plus Models | 4051N/4056N plus Models |
2.You can perform the paper switching as follows:
•Press the SHIFT key and then the PATH key. Select Manual and exit by pressing the SHIFT key. The fanfold paper moves backwards and the Enable path SS message will be displayed, then place the drive selection lever in the cut sheet position. The message Load paper will be displayed.
or
•Park the fanfold paper (PARK function). The Manual paper feeding will be automatically selected when the cut sheet is loaded.
Now, your printer is ready to load cut sheet. Follow step 1 to 5 in ” Loading Cut Sheets
” section.
80