ON LINE Key

ON LINE Normal Function

Pressing this key you will obtain different results depending on the

 

printer status:

 

• When the READY indicator is lit on, pressing this key you will cause

 

the stop of the printing at the end of the current line; the READY

 

indicator blinks if there is some data left in the Input buffer,

 

otherwise the indicator is turned off and the Wait message will be

 

displayed.

 

• When the READY is unlit or is blinking pressing this key the

 

printing will be enabled and the READY indicator is turned on.

 

• Pressing this key while powering the printer on, the message

 

Printing test is displayed and the check test is executed. If you

 

want to stop the self-test press this key again.

 

 

Program

Pressing this key you will obtain different results depending on the

Function

interface configuration (parallel or serial interface).

 

• In parallel configuration, the information in the Input buffer is reset

 

and the Buffer cleared message will be displayed.

 

• In serial configuration, the information in the Input buffer is reset.

 

 

28