3. If the printer is turned off, turn the printer on. The display shows Load Paper, if there is no paper in the printer. If you turn the printer on when paper is already inserted, the display will show Remove Paper while buzzer sounds 4 short "beeps".
The paper is ejected with a backward movement of maximum 24 inches. If you have not removed the paper yet, the buzzer will sound again 4 short “beeps”. Finally the display will show Load paper.
4.Feed the cut sheet in the slot. Press the LOAD or FF key. The paper will be loaded to the first printable line. The paper is positioned at the first printable line at 1/6 inch from the top edge of the paper. The last printable line of the sheet is positioned at 0.83 inch (21 mm) from the bottom edge of the paper.
4051/4056 plus Models | 4051N/4056N plus Models |
72