Leaving the Printer Setups

Whenever you wish to leave the current Printer Setup, proceed as follows:

•In the Power-On Configuration, press the PROGRAM key and the new settings will be automatically stored. The printer leaves the Power on Configuration Setup and is disabled to print (READY indicator unlit).

•In the Program Setup, press the PROGRAM key and if any change occurred the message SAVE

MACRO? will be displayed. Press the PROGRAM key and the modified values will be used as current settings (When the printer will be turned off they will be lost) or the key → to store the changes in a permanent way.

Power on Configuration Setup

The default values are marked with an asterisk (*) on the left. These are the available functions:

INSTALLATION

This function contents general parameters such as Protocol, Emulation and the

 

display language.

INTERFACE

This function defines the interface physical type and communication features.

PRINT STATUS

This function allows to print the current printer configuration.

RECALL FACTORY

This function allows to reset the factory default values.

37