Switching to the cut-sheet feeder

1. If any printed sheets remain in the printer, press the TEAR OFF button to advance the continuous paper to the tear-off position.

2.Tear off the printed pages.

3.Press the LOAD/EJECT button. The printer feeds the continuous paper backward to the standby position. The paper is still attached to the push tractor but is no longer in the paper path.

Caution:

Never feed labels backward. Labels can easily come off their backing and jam the printer. Before you switch to the cut-sheet feeder when you are using labels, remove the labels from the printer as described on page 2-26.

4. Place the paper-release lever in the single-sheet position.

Pull Tractor

The optional pull tractors, C80019* provide optimum continuous paper handling. (The asterisk is a substitute for the last digit, which varies according to country.) The pull tractor is especially useful with continuous multi-part forms. For best results, use the optional pull tractor along with your standard tractor installed in the push-tractor position. (See page 2-10 for instructions.)

Loading paper with the push tractor and the optional

pull tractor

1.Make sure the printer is turned off, the standard tractor is installed in the push-tractor position, and the paper-release lever is in the push-tractor position.

Using Printer Options

4-13