2.Remove the printer cover, paper guide, and paper-tension unit by lifting them up and off the printer.

3.Install the optional pull tractor in the pull-tractor position as described in Chapter 2.

Note:

The optional pull tractor cannot be installed in the push-tractor

position.

4.Load the continuous paper for the push tractor as described in Chapter 2.

5.Turn on the printer. Press the LOAD/EJECT button to load the paper, and then use the LF/FF button to feed two sheets of paper through the printer.

Caution:

Use the knob on the right side of the printer only to clear paper jams when the printer is off. Otherwise, you may damage the printer or cause if to lose the top-of-form position.

6.Move the paper-release lever to the pull-tractor position.7.Load the continuous paper for the pull tractor as described in Chapter 2.

4-14Using Printer Options