Installing in the push-tractor position

1.Make sure the printer is turned off. Lift the printer cover and the paper guide up and off the printer.

2.If necessary, remove the tractor from the pull-tractor position by pressing the lock tabs open while lifting the tractor up and out of the mounting slots.

3.Press open the tractor’s lock tabs. Hold the tractor horizontally above the printer and lower it straight down into the printer’s back mounting slots.

4.When the tractor is positioned in the mounting slots, release the lock tabs.

5.If you removed the clear plastic paper-tension unit previously, replace it by placing it on the printer’s mounting pegs; then lower into place. Press on both ends of the paper-tension unit until you feel it click into place.

6.Replace the printer cover.

7.Move the paper-release lever to the push-tractor position.

You are now ready to load continuous paper with the push tractor. See page 2-12 for instructions.

2-10 Paper Handling