MICRO FEED (LOAD/EJECT)

Feeds paper forward in

 

1/180-inch increments.

MICRO FEED (LF/FF) Reverse-feeds paper in 1/180-inch increments.

See “Micro-Feed” later in this chapter for more information on using the button.

Bin Select/TEAR OFF

This button selects the paper bin when both optional cut-sheet feeders are installed and you are printing on single sheets. When printing on continuous paper, press this button once to feed paper from the loading position to the tear-off position. Press this button again to feed the paper backward to the loading position.

CONDENSED

Press this button to print condensed characters. Press it again to return to normal character printing.

FONT

Press this button to select from among the built-in fonts.

You cannot select Roman T or Sans Serif H with this button. You can select these fonts only with your software.

Note:

The typestyle samples on the panel are meant as guides only; actual

printed results may differ slightly.

Other control-panel features

The control panel also gives you access to the two other special

functions.

Using the Printer 3-5