16.If necessary, adjust the paper position using the micro-feed feature described in Chapter 3.

Caution:

Use the knob on the right side of the printer only to clear paper jams when the printer is of. Otherwise, you may damage the printer or cause if to lose the top-of-form position.

17.To replace the printer cover, insert the front tabs into the slots on the printer and then lower the cover into place. Raise the paper-guide cover and rest it on the paper guide.

Removing continuous paper from the pull tractor

1.To remove continuous paper when using the pull tractor, tear off the paper at a point before it enters the paper slot.

2.Press the LF/FF button to feed the remaining paper forward, out of the printer.

2-20 Paper Handling