3.While holding down the ALT button, press the LOAD/EJECT button to adjust the loading position to a lower position on the page; press the LF/FF button to adjust the loading position to a higher position on the page. The MULTI-PARTlight stops blinking after a short time.

Note:

For continuous paper, the printer remembers this new position even after it has been turned off and back on.

The printer has a minimum and maximum loading position. If you try to advance the loading position beyond these limits, the printer beeps and the paper stops moving.

When the paper reaches the factory-set loading position, the printer beeps and paper feeding pauses briefly. Use the factory set ting as a reference point when adjusting the loading position.

The printer remembers the new loading position for single- sheet paper only until you turn off the power. The loading position returns to the factory setting when the power is turned on again.

3-16 Using the Printer