3.Pull the paper-set levers all the way forward until the paper guides retract and lock open to allow for paper loading.

4.Take a stack of paper and fan it. Next, tap the side and bottom of the paper on a flat surface to even up the stack.

Caution:

Do not use multi-part forms, carbon paper, or labels in the

cut-sheet feeder.

5.Insert up to 50 sheets of paper along the left paper guide.

6.Adjust the position of the right paper guide so that it matches your paper’s width. Make sure the position of the guide allows the paper to move up and down freely.

7.Push the paper-set levers back to clamp the paper against the guide rollers.

8.If necessary, attach the stacker-support wires (that come with the cut-sheet feeder) to the edge guides of the paper guide.

Using Printer Options 4-5