2.While holding down the ALT button, press the LOAD/EJECT button to feed the paper forward or the LF/FF button to feed the paper backward, as indicated by the arrows above

the buttons.

Adjusting the loading position

The loading position is the position of the paper after it has been automatically loaded by the printer. If printing is too high or low on the page, change the loading position with the micro-feed feature as follows:

1.Make sure the printer is turned on. If necessary, lift the printer cover up so you can see the paper position.

2.Load either continuous or single-sheet paper. (Load continuous paper by pressing the LOAD/EJECT button.) The MULTI-PARTlight begins to flash.

Note:

You can adjust the loading position only while the MULTI- PART light

is flashing.

Using the Printer 3-15