If you plan to use a printer stand, follow these guidelines:

Use a stand that supports at least 16.0 kg (35.3 lbs).

Never use a stand that tilts the printer at an angle of more than 15 degrees from horizontal. If you install a cut-sheet feeder, the stand must keep your printer level.

If you plan to load continuous paper through the bottom of the printer, choose a stand that provides an unobstructed paper path.

Position your printer’s power cord and interface cable so they do not interfere with paper feeding. If possible, secure the cables to a leg of the printer stand.

Align the paper stack so that the paper feeds straight into the tractor’s sprocket units.

Assembling the Printer

Removing the protective materials

During shipping, several pieces of packing material protect the printer. Before you assemble the printer, you must remove these protective materials as shown in the attached Notice Sheet.

Note:

Store all protective materials in case you ever need to transport your

printer.

1-4 Setting Up the Printer