4.Install the assembled double-bin cut-sheet feeder on the printer. See the section on installing a cut-sheet feeder earlier in this chapter.

5.Load paper into each bin. See the sections on loading paper earlier in this chapter.

The high-capacity cut-sheet feeder becomes bin 1 and the single-bin cut-sheet feeder becomes bin 2. Select the bin number by pressing the Bin Select button. The light of the selected bin comes on.

You can also specify the bin number using software commands. You may be able to specify the bin number using your application software. See your application software manual for details.

Switching between continuous paper and the

cut-sheet feeder

You can easily switch between continuous paper and cut-sheet feeder operation without removing the continuous paper.

Switching to continuous paper

1.If any single sheets are in the paper path, press the

LOAD/EJECT button to eject them.

2.Move the paper-release lever to the push-tractor position.

Note:

When you want to print several pages of continuous paper, fold the

first printed page forward at the perforation after the perforation emerges from below the printer cover. This helps the printer feed the

printed pages properly and prevents paper jams.

4-12Using Printer Options