Installing in the pull-tractor position

1.Make sure the power is turned off. Remove the paper guide. Raise the paper-guide cover and rest it on the printer cover. Lift the printer cover up and off.

2.Grasp both ends of the clear plastic paper-tension unit and lift it up from the front and lift it off the printer.

3.If necessary, remove the tractor from the push-tractor position by pressing the lock tabs open while lifting the tractor up and out of the mounting slots.

4.Push the tractor’s lock tabs into the open position. Tilt the tractor forward and lower it into the printer’s front mounting slots. An arrow on each side of the mounting slots shows you where to align the tractor.

5.When the tractor is positioned in the mounting slots , release the lock tabs.

6.Pull the paper-release lever forward to the pull-tractor position.

You are now ready to load continuous paper. See page 2-15 for instructions.

Paper Handling 2-11