Unpacking the Projector

After unpacking the projector, make sure you have all the parts shown below:

Save all packaging in case you need to ship the projector. Always use the original packaging (or the equivalent) when you need to send the projector to another location. If you are moving the projector by hand, use a carrying case (either an Epson case or something similar, such as a well-padded case). See page 12 for ordering information, and page 95 for transportation instructions.

Additional Components

Depending on how you plan to use the projector, you may need additional components:

■To receive an S-Video signal, you’ll need an S-Video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 12.

■To receive a component video signal from a VCR or other video device, you’ll need a component-to-VGA video cable. One may be provided with your video equipment, or you can purchase one from Epson; see page 12.

Welcome 11