note

You can also use the buttons on the projector to access the menu system:

MenuEsc

buttonbutton

Arrow buttons

Enter button

Using the Menu System

You can use the remote control (or the projector’s control panel) to access the menus and change settings. Follow these steps:

1.To display the menu screen, press the Menu button.

You see a menu screen similar to the one shown below (the settings may differ from those shown here, depending on the selected input source):

Options

Menu list

The menus are listed on the left, and the options available for the highlighted menu are shown on the right.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list. When

you’ve highlighted the desired menu, press the Enter button to select it.

3.Once you’ve selected the menu, use the pointer button to scroll through the list of options. (Some of the options may be

grayed out or unavailable, depending on the selected source.)
50Configuring the Projector