Epson 6100i Selecting the Image Source, , and, ports, Source, Source, Use the, Computer1, Computer2, 30Projecting, Source Search, The remote control has four

note

To focus and adjust the image, see page 34. If a projected image fails to appear, see page 31 for help.

Selecting the Image Source

Selecting the image source lets you switch between images input from different pieces of equipment connected to the projector (such as a computer or DVD player).

If you don’t see the image you want, select it using the Source Search button on the projector or the Source buttons on the remote control.

The Source buttons work as follows:

■Use the Source Search button to switch between equipment connected to the Computer1, Computer2, Video, and S-Video ports.

■The remote control has four Source buttons. Use them to switch between equipment connected to the port identified on each button.

Note that the Computer1 and Computer2 ports can be set up to use different input signals (for example, Analog RGB or RGB Video)—so if you have equipment connected to one of these ports, it’s important to make sure the correct signal is selected to match the equipment you’re using. You can change the input signal settings using the projector’s menu system; see page 54.

30Projecting