note

The Easy Management software cannot be installed on Macintosh systems.

Installing the Easy Management Software

The projector software CD-ROM includes the software you need to use EMP Monitor.

System Requirements

Before you install the software, make sure your computer meets these requirements:

■Microsoft® Windows 98 SE, XP, 2000, Me, or NT 4.0 (service pack 6a or later)■Pentium® MMX 166 MHz processor (Pentium II 233 MHz or better recommended)■At least 128MB of RAM (256MB or more recommended)■At least 20MB of free hard disk space■SVGA (800 ⋅ 600) or better display adapter and monitor

note

If you need to uninstall the software, use the Add/Remove Programs utility in the Windows Control Panel.

Installing the Software

Follow these steps to install the software:

1.Insert the projector software CD-ROM in your computer’s CD-ROM drive. The installer starts automatically.

2.Follow the on-screen instructions to install the software.Once installed, you can access EMP Monitor from your computer’s Start menu.
74Managing the Projector from a Remote Computer