■User’s Logo

Turn this setting On to display the image or logo you have captured whenever the projector is turned on. See page page 65 for more information.

■ProjectionFront: Projector is in front of the screen.

Front/Ceiling: Projector is in front of the screen, mounted upside-down from the ceiling.

Rear: Projector is behind the screen.

Rear/Ceiling: Projector is behind the screen, mounted upside-down from the ceiling.

■Operation

Direct Power On: When this feature is enabled, projection starts as soon as you plug in the power cord. You don’t have to press the P Power button.

Sleep Mode: When this feature is enabled, the projector’s lamp automatically turns off when the projector has not received any input signals for more than 30 minutes. This conserves electricity, cools the projector, and extends the life of the lamp. To resume projecting, press the P Power button.

High Altitude Mode: Turn this setting On when using the projector above an altitude of 4,921 feet.

■Standby Mode

Select Network On to use the network monitoring and control functions while the projector is in standby mode.

■Air Filter Setting

Alarm Timer: Lets you turn the air filter replacement notification on or off. If you are using the smoke air filter, make sure this setting is turned On.

Timer: Lets you change the amount of time the projector waits before displaying the air filter replacement notification.

note

When Direct Power On is enabled, press the P Power button to turn the projector off, wait until the P Power light remains solid orange, then unplug the projector.

Configuring the Projector 59